Maxpro X304 Quad 3S LiPo Balance Charger (for 3S Lipo only)
    SKU X304QD
    Brand MAXPRO
    Added 2011/04/26
    Updated 2011/04/26
     
    Tags: Maxpro,  X304,  balance  charger,  X304  quad 

    Features:

    Supports 3cells Li-Polymer batteries ONLY,   4 Channels work respectively


    Input Voltage: 13.5 - 24V DC

    Charge Current: 0.5 - 4.0A Adjustable in each channel

    LCD Screen shows every cell voltage in each channel

    Max Power: 200W / 16A

    Balance Precision: 10mV


    ----------------------------------------------------------------------------


    1. CHARGE FUNCTIONS


    1~4 packs of 3 cells Li-Polymer batteries can be chargerd at one time without same pack capability and cell voltage, there are 4 balance modules in the X304 Quad and provides 0.5~4A for every pack solely.


    e.g.  4 packs of 3 cells Lipo batteries(2000mAh - 2200mAh) will be finished charging in 1 hours with high efficiency.



    Warnings:



    • Use a high quality power supply for input power source.


    The input voltage must be 13.5~24 V, most of DC Power Supplier can be adjusted in +-1.5%range. Pls make sure the input voltage & power is rich for X304 Quad. if the input voltage is below 13.5V, the batteries will not be fully charged.



    • X304 Quad for 3cells Li-Polymer batteries ONLY. Don't charge other types & cells of battery.

    • Be sure that your Lipo battery pack balance connector & polarity match the type connected to the charger.

    • Beware that the temperature of the charger shell & battery packs will increase during charge at high power.

    • Do not exceed the battery manufacturer's suggested maximum charge rates.

    • Never charge batteries unattended.

    • Properly insulate and regularly inspect all connectors to eliminate the possibility of short circuit.

    • Do not open the case of the charger under any circumstances.  Doing so will void the warranty.


     



    Specifications:

    Input Voltage: 13.5 - 24V DC
    Charge Current: 0.5 - 4.0A Adjustable in each channel
    LCD Screen shows every cell voltage in each channel
    Max Power: 200W / 16A
    Balance Precision: 10mV
    DC input connector type: 4mm bullet male connector

    Includes/Requires:

    Includes:
    1 x Maxpro X304 3S charger

    * No instruction manual supplied with this charger.
    Back to computer version.
          Back
    Loading...