HiModel 100A / 120A 2-6S Electric Brushless Speed Control Type Professional-100A
    SKU HW100P
    Brand HiModel
    Added 2006/10/31
    Updated 2010/01/05
     
    Tags: HiModel_100A_120A_2-6S_Electric_Brushless_Speed_Control_Type_Professional-100A 

    Features:

    The Professional-100A supports 2-6S Li-poly battery pack or 5-18 cells NiCd/NiMH battery pack. It is a good choice for big RC aircraft and helicopter models.

    It come with a custom-built heat sink for Professional-100A, it has a perfect heat sinking effect so the whole ESC works more reliable.

    There are 4 earholes on the base board, so it is very easy to install the ESC firmly with screws.

    ■ Safety Arming Feature: Regardless the Throttle Stick position, the motor will not spin after battery connected. This will prevent any injury happened.

    ■ Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.

    ■ Programmable featurers:

    ●Brake Settings:brake enabled / brake disabled, default is brake disabled

    ●Battery Type:Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd),default is Li-xx.

    ●Low Voltage Protection Mode(Cutoff Mode) :power reducing / power cutoff, default is power reducing.

    ●Low Voltage Protection Threshold(Cutoff Threshold) :low / medium / high, default is medium cutoff voltage.

    ■ For Li-xx battery,number of battery cells are judged automatically,low / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 10 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*10=27.5V.

    ■ For Ni-xx battery, low / medium / high cutoff voltages are 0%(ie. never cut off )/45%/60% of the startup voltage. For example: a 10 cells NiMH battery pack, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*45%=6.5V。

    ●Startup mode: normal / soft / super-soft, default is normal startup.

    ●Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.

    ■ Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.

    ■ Advantages

    ● Military Standard Capacitor with extreme low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.

    ● Extreme low resistance PCB used on power output section, the thickness of copper sheet is more than 0.7mm.So the whole ESC has super current endurance capability.

    ● Compatible with Program Card for HiModel HW/Balancer/Economic/Professional Series ESCs.

    Specifications:

    ● Output: Continues 100A, Burst 120A up to 10 Secs.

    ● Input Voltage: 2-6 cells lithium battery or 5-18 cells NiCd/NIMh battery

    ● BEC (Battery Elimination Circuit) Output:None

    ● Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrusheLess Motor)

    ● Size:55mm*78mm*15mm(width*length*height)

    ● Weight: 125g

    Includes/Requires:

    Includes:
    1 x ESC
    1 x English Manual
    Back to computer version.
          Back
    Loading...