HiModel-36 AS Series Brushless Motor Speed Control
    SKU HM-36A
    Brand HiModel
    Manual Manual 1
    Added 2005/09/21
    Updated 2010/03/31
     
    Tags: HiModel-36_AS_Series_Brushless_Motor_Speed_Control 

    Features:

    * High rate (10 KHz) switching (PWM)
    * Six to twelve NiCd, Ni-MH cells or two to four Li-poly cells with receiver.
    * Up to ten NiCd, Ni-MH cells or three Li-poly cells with three micro servos.
    * Twelve NiCd, Ni-MH or four Li-poly cells MAX (with BEC disabled).
    * Powerful direct-drive ability (High-torque drive ability).
    * Smooth Linearity of throttle.
    * Dynamic braking ensures prompt prop folding.
    * BEC (1.0A) provides power to receiver and servos -eliminates separate receiver battery.
    * Over temperature protection.
    * User Programmable Features.
    * Low-voltage protection - the value of low-voltage cutoff can be set at 4.8V,5.6V,6V,7.2V,8.4V,9V,11.2V and 12V .
    * Cutoff can be programmed for motor stop or reduced power.
    * Brake Type selectable.
    * Throttle Range.
    * Timing Advance:4 to 10 degree, 10 to 20 degree, 20 to 30 degree to suite different magnet poles motors.
    * Safe "power on" arming program ensures motor will not accidentally turn on.
    * Low torque "soft start" prevents damage to fragile gearboxes.
    * Lost single protection: Auto shut down in 4 sec after signal is lost or radio interference becomes severe.
    * Microprocessor controlled.
    * PC connection and set up via PC enabled, you can even test your power system via PC software desinged for the ESC.
    * Change the rotation by programming
    * Motor Jam Protect: When motor jam normally make the ESC broken, HiModel's powerful hardware and software design can protect the ESC not be hurt.
    * Over heat protection: ESC will cut-off when temperaturer is higher than 155 degree.
    * Over voltage protection: ESC will cut-off when input voltage is higher than 18V.


    For more featurers, please visit here.

    Specifications:

    MODEL:HM-36A
    CURRENT: 36amp
    SURGE: 45amp
    BEC: 1amp
    SIZE:43*24*6.5(mm) / 1.69*0.94*0.25(in)
    WEIGHT (WITH WIRES): 22g / 0.75oz

    Download the PC Software here

    Download USB Driver here



    Comments:

    Programme of the ESC upgraded on 26/12/2005, the compatibility has much improved.
    HiModel
    28/12/2005
    Back to computer version.
          Back
    Loading...