FLY PRO Seires 30A 2-4S Brushless Speed Control Type FLY-30A-PRO SB
    SKU FLY30PRO
    Brand HiModel
    Manual Manual 1
    Added 2010/10/27
    Updated 2011/01/14
     
    Tags: FLY_PRO_Seires_30A_2-4S_Brushless_Speed_Control_Type_FLY-30A-PRO_SB 

    Features:

    ● Super fine and smooth touch of speed controlling, first-rate accurate linearity and quick-respond speed of throttle.
    ● Separate voltage regulator IC for MCU(Micro Controller Unit), high capability of anti-interference to decrease the possibility out of control.
    ● Low-voltage cut-off protection of battery, blocked rotation protection and throttle signal lose protection, etc. All these functions can prolong the service life of ESC effectively.
    ● It can be compatible with a programming card(optional component), which has a simple and visual surface so as to change the parameters conveniently at any time anywhere (reference to the manaul for programming card).
    ● Good and safe performance of power-on. The motor won’t be started no matter which position the throttle stick is on when the battery is connected.
    ● All the ESCs of the series can be attached to battery of Li-XX or Fe. The protection voltage becomes more accurate.
    ● Automatically adjustment of Timing recommended for outrunner and inrunner motors.
    ● Direction of motor rotation can be changed by transmitter or programming card.
    ● BEC has adopted the most advanced designing of Switch mode mastered by the main-controlling chip, combining of FET of extremely low resistor against high frequency, current limit protection, high efficiency of chip up to 93%, which can meet the demand of digital servo of high torque or simulating servo fully.

    Specifications:

    · Weight: 31 g
    · Size: 55 x25 x11 mm
    · Constant Current: 30A
    · BEC: Switch mode 5.5V/ 4A
    · PWM: 8 KHz
    · Input: 2 to 4 Li-Po/ 6-12 NiCd/NiMh


    Includes/Requires:

    Includes:
    1 x ESC

    Back to computer version.
          Back
    Loading...