Matek FC405-WING Flight Controller W/ Built-in OSD BEC
    SKU F405-WING
    Brand Matek
    Added 2019/06/26
    Updated 2019/06/26
    Tags: Matek_FC405-WING_Flight_Controller_W_Built-in_OSD_BEC 



    Matek FC405-WING Flight Controller W/ Built-in OSD BEC

    FC Specifications

    MCU: 168MHz STM32F405
    IMU: MPU6000 accelerometer/gyro (SPI)
    Baro: BMP280 (I2C)
    OSD: INAV OSD w/ AT7456E chip
    Blackbox: MicroSD card slot (SD/SDHC)
    VCP & 6x UARTs
    2x Motors, 7x Servos outputs
    2x I2C
    3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
    Built in inverter for SBUS input (UART2-RX)
    PPM/UART Shared: UART2-RX
    SoftSerial on TX2 pad
    Battery Voltage Sensor: 1:10 (Scale 1100)
    WS2812 Led Strip : Yes
    Beeper : Yes
    RSSI: Yes
    FC Firmware

    INAV Flight
    Target: MATEKF405SE

    Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
    2x ESC power pads
    Current Senor: 104A,  3.3V ADC,  Scale 317
    BEC 5V output

    Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
    Continuous current: 2 Amps, Max.3A
    BEC 9V /12V output

    Designed for Video Transmitter, Camera, Gimbal ect.
    Continuous current: 2 Amps, Max.3A
    12V option with Jumper pad
    BEC Vx output

    Designed for Servos
    Voltage adjustable, 5V Default, 6V or 7.2V via jumper
    Continuous current: 5 Amps, Max.6A
    Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
    BEC 3.3V output

    Designed for Baro / Compass module and Spektrum RX
    Linear Regulator
    Continuous current: 500mA

    Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
    Dimensions: 56 x 36 x 13 mm
    Weight: 25g


    1 x Flight control
    3 x pin set

    Back to computer version.