HiModel 5.8G 1000mW (1W) High Power Transmitting Module (TX) -Golden Edition | SMA, jack
    SKU HI581W
    Brand HiModel
    Added 2012/12/05
    Updated 2013/06/03
     
    Tags: 1000mW  TX,  high  power  TX  module,  long  distance  transmitter 

    Features:

    New 5.8G 1000mW Golden version.

    - Upgraded ball bearing cooling fan, lower noise, and less vibration.
    - Transmitting circuit is optimized, provides a longer range.

    Specifications:

    HiModel 5.8G 1000mW (1W) High Power Transmitting Module (TX) -Golden Edition

    video format supported: NTSC/PAL
    Connector type: SMA Jack (on the TX module side)    Refer to here for connector type diagram
    Transmitting power: 1000mW
    Power input: 7.4-13V (3S Lipo suggested, does NOT support 4S Lipo)
    Transmitting current: 600mA @12V

    *Note: TX antenna must be installed properly before it is switched on, power on without install antenna, or a improper antenna was used may easily burn the TX, and such damage is not covered by warranty.


    * WRONG POLARITY WILL BURN THE MODULE, PLEASE DO VERIFY THE POWER SUPPLY POLARITY BEFORE YOU POWER IT ON.




    Includes/Requires:

    Includes:
    1 x transmitter (TX moudle)
    1 x basic wire set

    Requires:
    1 x receiver

    Comments:

    The TX antenna is intentionally glued at factory, please do not try to remove it, TX damage due to replacing/removing the antenna is NOT covered by warranty.
    Back to computer version.
          Back
    Loading...