* Compatible with a programming card to change and set parameters easily and conveniently * Super fine and smooth touch of speed controlling, first-rate accurate linearity * Soft Start-up mode and Constant RPM mode (Governor mode) * adjustable F3A brake. * 3 steps adjustable regular back EMF brake. * High capability of anti-interference * Low-voltage cut-off protection for per cell battery * Under-voltage cutoff * Under-voltage can be disabled * Under-voltage with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4 * Variable cutoff voltage / cell * Slow down instead of cutoff * Active freewheeling circuit * LED status display * Timing of motor ranges from 0° to 30° * Blocked rotation protection * Reversible rotation direction * Over-temperature protection and Overload alarm * Anti sparkling circuit: reduces connection sparkles * Throttle signal lose protection. When the signal loses for 3 seconds, the power will automatically cut off. * Safe power-on. The motor won’t start no matter which position the throttle stick is when battery connected ***This series ESC can be compatible with both helicopter and airplane.***
Type: FLY 100A-ICE SB Size: 72 x 32.8 x 14 mm Constant Current: 100A Max Current: 120A for 10 seconds Input Voltage: 2-6 cells li-XX or 6-16 Ni-MH/Ni-Cd battery BEC: yes, Switch BEC BEC Output: 5.5V/6A PWM: 8-16 KHz Max RPM: 240,000rpm for 2 Poles Brushless Motor Weight: 69g
* In the latest version, the cable for programe card and cable for throttle are combined into one, you can programe the ESC by connecting your programe card to the throttle cable.
Includes: 1 x ESC
* battery and motor connectors are not included.
Hint: There are two wires with servo connectors, the shorter wire is for program card use, and the longer wire is for receiver.
Customers who bought the above may also need
Messages of this section are not monitored by HiModel, it is for review and discussion among customers only.
Upload Image: (Up To 5 Files, only .jpg/.gif/.png
files are accepted and sizes below 2MB for