Product information: JR 40Mhz 7CH Auto Scan PLL-Synthesizer FM Receiver RS70  
[Print]   [Close]

CODE:  JRRS7040 MANUFACTURER:  JR PROPO
NAME:  JR 40Mhz 7CH Auto Scan PLL-Synthesizer FM Receiver RS70 WRIGHT:  17g
SUBCATEGORY:  Radios SIZE:  15x25x47mm

Features:
7 channel synthesizing PPM receiver. Never use crystals again! Dial up any frequency in the 40Mhz range instantly
You can set the frequency in the receiver by following these instructions:
Plug a battery into the RS70 receiver and turn power on.
Turn on the transmitter and place it 1 metre from the receiver.
Press and hold down the “SCAN” button on the end of the receiver for more than 2 seconds.
Release the “SCAN” button for 2-3 seconds, then press the “SCAN” button again for ½-1 second.
The LED will flash on and off quickly during the scanning process and once this process is completed the LED will stay solidly lit.
If the LED flashes slowly then there has been a problem with the scanning procedure and you should repeat the procedure after checking that the receiver battery has sufficient voltage and that there are not any other transmitters in the close vicinity of your receiver.

Specifications:
Type: RS70
Band: 40Mhz
●Channel availability: 77 (40.770), 79 (40.790), 81 (40.810), 83 (40.830), 85 (40.850).
●FM/PPM 7ch receiver
●Available for FM transmitter (PPM mode)
●Auto Scan System
●Measurement:15x25x47mm
●Weight: 17g

HiModel (http://www.himodel.com/)

copyright © HiModel All Rights Reserved