72Mhz JR X-2610 6-channel digital proportional radio control system W/539x4 R770S Printable page- JR PROPO | HiModel - Wholesale Distributor Supplier Exporter wholesaler Manufacturer China Chinese Radio Control RC R/C Hobby.

Product information: 72Mhz JR X-2610 6-channel digital proportional radio control system W/539x4 R770S			[Print] [Close]

CODE:	JR261072	MANUFACTURER:	JR PROPO
NAME:	72Mhz JR X-2610 6-channel digital proportional radio control system W/539x4 R770S	WRIGHT:
SUBCATEGORY:	Radios	SIZE:

Specifications:

■Transmitter Specifications:
●Multifunction 6 channel radio
●User-friendliness graphic display computer system
●Comfortable fitted computer-designed, ergonomically styled transmitter case.
●Advanced digital trim
●Adjustable spring tensions and length by the ultra precision control sticks
●Crystal type
●10-model memory
●Fail safe function during SPCM modulations
●Trainer function as standard equipment
●Charging battery jack is fitted as a standard equipment
●SPCM and PPM are available
●Model name, data copy function
●Same switch layout for heli and aero type

●Flaperon, elevon function are accepted. During those setting, differential function is operable.
●V tail helicopter is operable

Throttle curve and pitch curve with five adjustable points per curve allow you to have a smoother curve setting. The graphical display makes your operation easier to understand.

■Receiver Specifications:
Model Number: R770S SPCM
●Small and slimline design 7 channel receiver
●FM-NEW ABC & W system makes R770 high sensitive.
●A narrow band ceramic filter for high-signal selectivity assists in rejecting cross modulations from other common radio frequencies, such as RC transmitters for local paging systems.
●S type PCM receiver developed by a advanced digital technic using a high-reliability and super small micro computer
●Fail safe function is operable with loading a CPU and it gives a safe flight.
●Direct servo control for control servos without radio frequency output.

■Servos:
Type: ES-539
Torque:4.8kg.cm
Speed:0.23 sec
Weight: 38 gm
Size mm (LxWxH): 32.5 x 19 x 38.5mm
Ball bearing: Yes
Motor: Ferrite

■Charger:
Model Number: NEC-322AUS
Input Voltage: AC-240V
Output Current: 50mA TX/100 mA RX
Charging Time: 15 Hours

Includes/Requires:

Includes:
1 x transmitter
1 x R770S receiver
4 x ES539 servos W/ hardware
1 x 4N1100 Ni-Cd 4.8V/1100mah battery
1 x
1 x RX & TX battery charger NEC-322 AC220V
1 x servo extension
1 x switch harness
1 x English manual

HiModel (http://www.himodel.com/)